IJA_2026v16n5

International Journal of Aquaculture, 2026, Vol.16, No.5, 378-396 http://www.aquapublisher.com/index.php/ija 391 communication modules, and intelligent actuators should first be scientifically configured according to aquaculture scale, cultured species, pond conditions, and management objectives. Different ponds vary in area, water depth, stocking density, water source conditions, and environmental risks, so the required monitoring indicators and the number of devices are not exactly the same. For ordinary ecological ponds, priority should be given to basic monitoring equipment for water temperature, dissolved oxygen, and pH. For high-density aquaculture ponds or ponds for high-value aquatic products, ammonia nitrogen, nitrite, turbidity, meteorological monitoring, and video monitoring equipment should be further added to improve risk identification capacity. Previous studies have shown that compact integrated printed circuit boards and microcontroller-based systems, such as Arduino, ESP32, and STM32, can stably collect key parameters such as temperature, pH, dissolved oxygen, and turbidity in real time with relatively low maintenance and hardware costs, making them suitable for continuous monitoring in pond aquaculture scenarios (Abdikadir et al., 2024; Olanubi et al., 2024). Meanwhile, systematic calibration and linear regression comparison with professional instruments can further improve the accuracy of low-cost sensors, increasing their accuracy to 76%-97% and reducing relative errors to below 4%, thereby enhancing their applicability in continuous monitoring of ecological ponds (Obiero et al., 2019). Equipment configuration should also emphasize practicality, stability, compatibility, and low energy consumption. Most ecological ponds are exposed outdoor environments, where equipment is affected for long periods by water immersion, sunlight, rainfall, temperature and humidity changes, and biofouling. Therefore, sensors and control terminals with strong waterproof, anti-corrosion, and anti-interference capabilities should be selected. At the same time, monitoring equipment should be easy to install, clean, calibrate, and replace, thereby reducing the difficulty of daily maintenance for aquaculture operators. For ponds that already have aerators, feeders, water pumps, and other equipment, digital transformation can be achieved by adding intelligent control modules rather than completely replacing existing equipment, thereby improving equipment utilization and renovation cost-effectiveness. In terms of communication methods, NB-IoT, LoRa, and Wi-Fi modules can realize long-distance transmission or cloud connection with relatively low power consumption, allowing remote ponds to maintain continuous monitoring (Malandrakis, 2025). In areas with weak infrastructure or limited network bandwidth, hybrid architectures that support both local processing and cloud analysis can also be adopted to ensure stable system operation under rural low-bandwidth conditions. In addition, a daily maintenance system and redundancy guarantee mechanism for digital monitoring equipment should be established. During sensor use, problems such as data drift, probe contamination, and line failures may occur. Without regular inspection, the reliability of monitoring results will be directly affected. Therefore, aquaculture operators should regularly conduct probe cleaning, data calibration, line inspection, outlier screening, and software upgrading according to equipment operation requirements, and establish maintenance records. Multi-sensor nodes can be combined with outlier rejection algorithms, and redundant monitoring can be set for key parameters such as dissolved oxygen and pH to improve data integrity and system fault tolerance (Flores-Iwasaki et al., 2025). For large-scale aquaculture bases, specialized technical personnel can be assigned to equipment operation and maintenance. For small- and medium-sized operators, cooperatives, technical service companies, or grassroots extension institutions can provide centralized maintenance services to ensure the long-term stable operation of digital monitoring systems. 6.2 Establishing scientific data management and early-warning mechanisms The core value of digital monitoring lies not only in data collection, but also in scientific data management and effective utilization. Digital monitoring of ecological ponds generates large amounts of time-series data, including water quality indicators, equipment operation, feeding records, medication use, meteorological changes, alarm information, and aquaculture results. Without a standardized data management mechanism, problems such as data dispersion, duplicate records, inconsistent formats, and “collection without analysis” may easily occur. Therefore, unified mechanisms for data collection, classified storage, dynamic analysis, and secure management should be established, together with platform interfaces that support intuitive charts, data queries, historical curves, and report export, so that monitoring data can truly serve aquaculture decision-making. Many systems have uploaded

RkJQdWJsaXNoZXIy MjQ4ODYzNA==