IJA_2026v16n5

International Journal of Aquaculture, 2026, Vol.16, No.5, 378-396 http://www.aquapublisher.com/index.php/ija 382 fish survival rates, thereby supporting proactive intervention. Fuzzy logic-based systems can integrate multiple parameters such as temperature, pH, dissolved oxygen, salinity, and weather, and send control instructions through MQTT to maintain optimal environmental conditions with reduced manual intervention (Nagothu et al., 2024). Through this “perception-transmission-analysis-early warning-regulation” operating mode, digital monitoring can shift pond management from passive response to proactive prevention, providing technical support for the precision, intelligence, and efficiency of ecological pond aquaculture. 3 Application Contents of Digital Monitoring in Ecological Pond Aquaculture 3.1 Real-time monitoring of water quality and environmental conditions The water quality environment is a core factor affecting the effectiveness of ecological pond aquaculture. Changes in indicators such as water temperature, dissolved oxygen, pH, ammonia nitrogen, nitrite, turbidity, and electrical conductivity are directly related to the feeding, growth, disease resistance, and survival rate of cultured organisms. In ecological pond aquaculture, maintaining a stable and suitable water environment is the foundation for achieving the coordinated improvement of production benefits and ecological benefits. Traditional pond aquaculture mainly relies on manual sampling and empirical observation to judge water quality conditions. The monitoring frequency is limited and is easily affected by time, weather, and personnel experience, making it difficult to detect continuous changes in the water environment in a timely manner. By deploying multi-parameter sensors for temperature, pH, dissolved oxygen, turbidity, and electrical conductivity in ponds, and by adding indicators such as ammonia nitrogen and oxidation-reduction potential in some scenarios, digital monitoring systems can continuously transmit data to cloud platforms or local servers through wireless networks, thereby realizing real-time collection, dynamic recording, and remote viewing of water quality and environmental conditions (Figure 1) (Hete et al., 2024). Figure 1 Architectural diagram of IoT system for water quality monitoring and real-time visualization (Adopted from Hete et al., 2024) In practical applications, real-time monitoring of water quality and environmental conditions can not only reflect the water quality status at a certain point in time, but also form time series and variation curves through continuous data, helping aquaculture operators analyze patterns of water quality fluctuation. Relevant studies have shown that digital monitoring systems can replace traditional low-frequency manual sampling with high-frequency or continuous data collection, and present water quality changes to operators in a more intuitive way through visual dashboards and mobile interfaces (Shete et al., 2024). For example, dissolved oxygen is usually lower in the early morning and increases during the day with enhanced photosynthesis; ammonia nitrogen accumulation and nitrite elevation are more likely to occur in pond water during high-temperature seasons; and

RkJQdWJsaXNoZXIy MjQ4ODYzNA==